Powder Curing and Paint Baking Ovens
We supply wide range of Powder curing and paint baking ovens with various heating media options such as DIESEL, LPG, CNG and ELECTRIC fired which includes.
Conveyorized camel back oven.
Powder Coating ManufacturerConveyorized tunnel type oven.
Powder Coating ManufacturerBatch type.
The oven is made out of 18 gauge GI sheets with Nut-bolt construction for the assembly of the 2 cassettes to each other. Asbestos tape of size 40 x 3 mm will be provide in between two panels to avoid the heat loss through conduction and save some amount of energy. For the insulation of the cassettes we are providing 48 - 63 kg/M3 density rock wool to insure the insulation and outer wall skin temperature will not be 5-10 degree celcius more than atmosphere. Hot air circulation delivery ducts made out of 1mm thick GI sheet with suitable stiffeners will be laid on the bottom surface of the ovens. The suction duct with the air distribution grills will be provided to ensure uniform hot air flow inside the oven.
Air distribution the grills/dampers fixed on the duct for maintaining uniform velocity inside the oven and get proper curing/baking of the component(TTR).
Complete SS 304 heat exchanger will be provided wherein the burner will be fired and the heat will be transferred from the heat exchanger surface inside the oven with the help of the centrifugal blower which will take the heat generated in the heat exchanger to the oven and circulate the same in a cycle.
Heat exchanger can be direct fired or indirect fired depending on customer requirement and fuel available.
